Stacks Image p505_n4
Official TREZOR Partner

Set-up guide Trezor One

Set-up guide Trezor One

  1. Unpacking & Instalation

    My Image

    Follow the below instructions in order to start using the Trezor One.

    We will guide you step-by-step, starting with the unboxing of the Trezor One device, followed by its set up.

  2. Verify that the security seals are intact and unbox the Trezor One device

    My Image

    Two security seals are present on the outside of the box (top and bottom). Verify that these 2 security seals are intact, in order to make sure the box has not been previously opened.

    In case any of the security seals has been broken or removed, please contact us via email: info@cryptohardware.be

    If none of the security seals has been broken or removed, please continue with the below step-by-step guide.

  3. Unbox the Trezor One device and its accessories. The box contains the following items:

    My Image

    Unbox the Trezor One device and its accessories. The box contains the following items:

    - Trezor One;
    - USB cable for connecting the Trezor One to a desktop or laptop;
    - Booklet for writing down your seed key;
    - 1x lanyard;
    - 1x Instructions manual; and
    - 4x TREZOR stickers.

  4. Set up of Trezor One

    My Image

    Install the « Trezor Bridge ». software. The installation of the Trezor Bridge software will allow your Trezor One device to connect to your web browser.

    Make sure either Google Chrome or Mozilla Firefox is installed on your computer (Trezor Bridge is compatible only with said 2 browsers).

    Close and restart your web browser after the installation of the Trezor Bridge software.

    Connect the Trezor One with your computer via the USB cable that was included in the box.

    Follow the instructions shown on the screen of your Trezor One device; open trezor.io/start in your web browser (i.e. Google Chrome or Mozilla Firefox).

    Choose Trezor One on the web page appearing in your web browser.

  5. Continue to wallet

    My Image

    Click on the green button ‘Continue to wallet’.

  6. Firmware

    My Image

    For security purposes, the Trezor One device has no firmware installed out of the box.

    Start by installing the firmware on the Trezor One device by clicking on the green button ‘Install firmware’.

  7. Waiting for firmware to be installed

    My Image

    The installation of the firmware can take several minutes. Please be patient.

  8. New firmware successfully installed

    My Image

    Once the installation of the firmware has been completed, a message will appear both on the screen of your Trezor One device and in your web browser, instructing you to (1) unplug the Trezor One device and (2) reconnect the Trezor One device with your computer.

  9. Update finished successfully

    My Image

    Once you have reconnected the Trezor One device with your computer, the following message will appear on the screen of the Trezor One device:

    “Update finished successfully. Please reconnect the device.”

  10. Create Wallet

    My Image

    Unplug the Trezor One device and reconnect the Trezor One device with your computer.

    Once you have reconnected the Trezor One device with your computer the following 2 options will appear in your web browser:

    1/ Create a new wallet.
    2/ Recover wallet.

    Click on the green button ‘Create new’ if you are using a Trezor device for the first time or if you already own a Trezor device but you want to create an entirely new wallet.

  11. Welcome

    My Image

    Once you have made your choice, please wait a few moments before your Trezor One is ready for the next part of the set-up process.

  12. Continue to the wallet

    My Image

    Once your Trezor One device is ready, click on the green button ‘Continue to the wallet’ in order to complete the set-up process (Highly recommended) or start exploring some of Trezor One’s functionalities by browsing through the slide deck appearing in your web browser and clicking on ‘Learn more’.

    In order to complete the set-up process, you will need to (1) create a backup of the Trezor One device, (2) give a name to the Trezor One device and (3) choose a PIN.

  13. Create a backup

    My Image

    After having clicked on the green button ‘Continue to the wallet’ you will be presented with the possibility of creating a backup of the Trezor One device. It is absolutely essential to create a backup of your Trezor One device before you start using the Trezor One for sending or receiving cryptocurrency. The seed key that you will be asked to write down during the backup process will give you the assurance that you will always be able to access your cryptocurrency stored on the Trezor One device in the future, no matter the circumstances (e.g. in case you would lose the Trezor One device, in case you damage your Trezor One device, in case you forget your PIN, etc.).

    Click on ‘Create a backup in 3 minutes’.

  14. Back up

    My Image

    Follow the instructions shown on the screen of the Trezor One device and in your web browser.

  15. Back up 3 minutes

    My Image
    My Image

  16. Seed Key

    My Image
    My Image
    My Image

    Follow the instructions shown on the screen of the Trezor One device and accurately write down the seed key (i.e. correct spelling and in the right order), composed out of 24 words in total, in the seed key booklet included in the box.

    It is essential that you store your seed key only offline and in a secure place which only you can physically access. Never make an electronic copy of your seed key (e.g. on your phone or computer).

    In this regard, we highly recommend using a Cryptosteel for safely storing the seed key of your Trezor One device, in a way that is indestructible.

    Congratulations. You have successfully backed up your Trezor One device. Click on the green button ‘Continue’ in your web browser in order to complete the next steps of the set-up process.

  17. Give a name to your Trezor One device

    My Image

    Choose a name for your Trezor One device and type this name in the appropriate input box in your web browser. Click the green button ‘Confirm to continue’.


    Confirm the action on your Trezor One device.

    Click the green button ‘Continue’.

  18. Choose a PIN

    My Image
    My Image

    Follow the instructions shown on the screen of the Trezor One device and choose your PIN.

    Insert the PIN in your web browser. To achieve this, select the correct squares in your web browser that correspond to the relevant squares with numbers shown on the screen of the Trezor One device.

    Once all the correct squares have been selected in the right order, click on the green button ‘Enter PIN’ in your web browser.

  19. Confirm the PIN

    My Image
    My Image

    Repeat the PIN and click a second time on the green button ‘Enter PIN’ in your web browser.

    WARNING: The second time you are asked to enter your PIN, the random order of numbers shown on the screen of your Trezor One device has changed. Hence, make sure to use the correct squares shown in the web browser that correspond to the relevant number shown on the screen of the Trezor One device.

  20. Your pin is set

    My Image
    My Image

    Congratulations. The PIN of your Trezor One device is set. Your Trezor One is ready to go.

  21. Finish

    My Image

    Click on the green button ‘Finish’ in your web browser.

You have managed to complete the set up process

You have managed to complete the set up process of your Trezor One device and you are now able to take advantage of all its functionalities, such as sending and receiving cryptocurrency, make use of the Trezor password manager or use the Trezor One as a next generation U2F security token for better securing your online accounts (e.g. email, social media accounts, could storage accounts, etc.).

In case you would have any questions regarding the Trezor One, we kindly invite you to take a look at our Frequently Asked Questions page and/or Resources page

YOU DON’T OWN A TREZOR ONE YET?

My Image

Invest in the security of your cryptocurrency and place an order now. Any order placed before 5pm is shipped out the same day.

Trezor One

EUR 79,99


Business information

Genesis Block BVBA
Lintsesteenweg 233
2540 Hove
Belgium
BTW: BE0685844735

Products


We use cookies to ensure that we give you the best user experience on our website. By clicking OK, you consent to our use of cookies on this device in accordance with our cookie policy, unless you have disabled them.